Reference:
Universal Remote Control NOB5039
The NORBLAST® remote-control blocks are designed for precise, safe control. Available in several versions and different sizes, they can be bought on their own or integrated into a complete system.
Complete one-piece 1″ 1/4 remote control (in 1 part) for NOB100,150,200,280.
One-piece – 1″ 1/4
Available: 100L / 150L / 200L / 280L
Références
NOB5039
Remote-control set with silencer for 100, 150, 200, 280L
NOB5000
Remote control
NOB2037
Silencer with couplings 100, 150, 200, 280L
Operating your blaster safely
The different types of NORBLAST® remote controls
What is a remote control for?
The remote-control system lets the operator start or stop the abrasive projection directly from their position, in complete safety. The remote-control block is fixed directly on the blaster and always fitted with a silencer. This device is mandatory under current labour legislation and is designed to protect the operator from accidents.
What does a remote-control system consist of?
A control block
It opens/closes the intake and exhaust air. It has a built-in silencer to reduce noise.
A control hose
It links the control block to the blaster and transmits the open/close commands.
A control handle
Located near the nozzle, the so-called “dead man’s” control handle lets the operator control the abrasive projection.
How does it work?
The remote-control system acts as a safety switch placed in the operator’s hands. As long as the handle is held down, the machine is under pressure and blasting is active. As soon as the handle is released, the circuit shuts off automatically: the air supply is cut, the exhaust opens, and the tank depressurises. This lets the projection be stopped at the nozzle without outside help, without having to go back to the machine. The remote-control system comes in two formats to suit all environments: one-piece, for an all-in-one solution, or separate, for more flexibility.
One-piece control blocks?
Advantages
Just 1 module.
More compact.
Fewer couplings
Less risk of leaks.
Drawbacks
- If one part fails, the whole block has to be dismantled.
Separate control blocks?
Advantages
Two distinct modules.
More modular depending on the setup.
If one fails, only one of the two parts needs dismantling.
Drawbacks
More couplings, so more potential risk of leaks if badly fitted.
Less compact.
Made in France in our workshops in Haute-Savoie
After-sales service for overhauls and maintenance
Designed for rental with rugged machines and reinforced components. Simple start-up.
Immediate profitability: fast ROI from the very first rentals. Pricing tailored to professionals.
Easy to maintain with easy access to wear parts and simplified maintenance.
Complete support: hands-on training, rental info sheets ready to hand to the customer. Responsive after-sales service, spare parts available.